Vickers Vedette, CF-MAG

  • Status: On display

    VickersVedette-640x250

    This small wooden flying boat is one of 60 that were designed and produced by Canadian Vickers Ltd. of Montreal between 1924 and 1930. It was the first aircraft manufactured in Canada and was used for aerial photography and production of the first aerial maps of Canada’s north, as well as for forest inventory and fire patrols.  Many of the topographical maps in use today are based on photographs taken from Vedettes.

    The Vedette was able to rise off the water quickly which was an important characteristic.

    Several were based in Manitoba and flew off the Red River in Winnipeg or from locations like Victoria Beach and Lac du Bonnet. Vedettes also patrolled the coast of Nova Scotia and were used at the seaplane training base at Jericho Beach in BC. They were eventually replaced by the more versatile (all-season) aircraft such as the Fairchild, Bellanca and Norseman. The remaining Vedettes were destroyed or made into boats until no complete aircraft were left.

    The RCAF purchased 44 of the 60 Vedettes and retired the last one in 1941.

    CF-MAG

    CF-MAG was built in 1929 and was placed in storage until it was purchased by the Government of Manitoba in 1934, along with five ex-RCAF Vedettes (for $1 each) to be used for foreset fire patrols. In 1937, the engine of CF-MAG failed while on a flight to Cormorant Lake. The pilot touched down in a swamp, then walked to an area where he could be rescued. A week later, an attempt was made to retrieve the downed aircraft, but the swamp was too small to permit takeoff. After all the usable parts were salvaged, the hull was soaked with fuel and the Vedette set on fire.

    A 22-Year Road to Replication

    Decades later, our museum’s retrieval team recovered the remains of this and two other Vedettes to guide the development of a replica. Museum volunteers pieced together information from the three wreckages. Plans had to be re-drawn before construction could begin (the Vedette plant had since burned down so no original plans remained). Over 100 volunteers contributed to the build effort. Since CF-MAG contributed the bulk of information to the build, those are the letters which are painted on the hull. On May 24, 2002, a dedication was organized at the museum for the opening of the Vickers Vedette exhibit.

    This aircraft is the only example of this type in the world. Although it is airworthy, according to the standards of the late 1920s, it has not been certified as we do not plan to fly it.


3 Responses and Counting...

  • David Corscadden 06.24.2011

    I am very interested in building an RC version of the Vedette but I have not been able to find drawings other than some 3 views. Is it possible to get either a digital scan or copy of the plans?

  • Boni Penna

    What is its powerplant
    How many seats

  • Karen

    Dear Boni: Thank you for your question regarding the Vedette. The Vedette is fitted with an Armstrong Siddeley “Lynx” 215-230 HP Engine, and has two seats, for pilot and co-pilot, in the cockpit, and a bench for the photographer in the forward ‘bucket’ position.

Leave a Reply

* Name, Email, and Comment are Required